Dec Pac Wheelchair Ramps are a lightweight solution to the barrier problem. Dec Pac Wheelchair Ramps fold accordion style, no assembly, simply unfold and they are ready to use.

Dec Pac wheelchair ramps come in a variety of sizes from small Personal sizes to longer lengths. Use Dec Pac wheelchair ramps to overcome steps, doorway thresholds, or getting in and out of minivans. The fiberglass laminate makes the wheelchair ramp quiet so it doesn't rattle in the van. The panels fold small enough to slide under the seats in a minivan. The Personal sizes can be easily carried on the back of your wheelchair.

Wheelchair Ramps are available in a Multi Purpose style with a flat deck in three or four panel. The Edge Barrier style is a four panel ramp with a 2 3/4" high safety edge. Dec Pac Wheelchair Ramps have a maximum load capacity of 650 lbs. (ClarkeHealthcare)

Choose Dec Pac model:
SelectMP210 + $34.00MP24MP44 + $357.00MP55 + $467.00MP66 + $612.00MPEB44 + $657.00MPEB55 + $861.00MPEB66 + $1,057.00

Compact, portable wheelchair ramps set up in seconds to safely bridge gaps over steps and curbs. Nonskid driving surface provides traction. Lightweight anodized aluminum is rustproof. Detachable side rails act as bumper guides for maximum security. Easy-to-assemble, for use with manual and electric wheelchairs and scooters. Wheelchair ramps extend to 30" wide. 3' ramp rolls up to just 6" in diameter. Weight capacity: 600 lbs. 3' ramp weighs 17 lbs. Nylon storage bag with strap handle included.

Can be separated into two lightweight sections, making transportation, set up and storage easier. The unique bottom transition plate is self-adjusting — resulting in smoother ramp to ground transfer — and provides greater flexibility at various ramp angles. Features high-quality, nonskid tape with a yellow reflective strip on the ramp surface. Unfolds to a 29 1/2" wide platform and features an 800-lb. weight capacity. 15"W folded. Made of aluminum. Available in 2', 3', 4', 5' and 6' lengths.Call for shipping quote for ramps longer than 3 feet.

Select Model
AS2 - 2 ft ramp + $134.95 
AS3 - 3 ft ramp + $189.95 
AS4 - 4 ft ramp + $264.95 
AS5 - 5 ft ramp + $314.95 
AS6 - 6 ft ramp + $377.95 

The EZ-ACCESS® Modular Threshold ramp is a lightweight yet durable free-standing ramp designed for doorways, sliding glass doors and raised landings. The modular design, with its interchangeable components, easily accommodates thresholds from ¾" to 6" high. This seam-free ramp is 34" wide and ideal for use with wheelchairs, walkers, and cane users. Made of anodized aluminum and is intended for indoor or outdoor use.

Select ground shipping when ordering one ramp. If ordering multiple ramps please call for shipping quote. Base price is for the lowest height ramp. Drop down selection shows additional costs added for higher thresholds.

Select Size
1 - 1 inch high + $54.95 
1.5 - 1 1/2 inch high + $69.95 
2 - 2 inch high + $79.95 
3 - 3 inch high + $99.95 
4 - 4 inch high + $114.95 
5 - 5 inch high + $142.95 
6 - 6 inch high + $174.95 

A seamless nonskid driving surface makes it safe, secure and ideal for scooters, walkers, wheelchairs, canes and crutches. Heavy-duty and extra-wide, this 36" wide ramp features an 850-lb. weight capacity and easily accommodates wider chairs. Extruded aluminum and powder-coated handrails. Ramp may be used without handrails if preferred. The light weight is ideal for temporary or semi-permanent home access. Outside width is 40 1/4"; handrails are 35 3/4"H. Truck shipping - call for shipping quote. Comes in 4', 6', 8', 10' lengths.

Select Model
CS10 - 10 ft ramp NO RAILS + $804.00 
CS4 - 4 ft ramp - NO RAILS + $340.00 
CS6 - 6 ft ramp - NO RAILS + $198.00 
CS8 - 8 ft ramp NO RAILS + $664.00 
CSHR10 - 10 ft ramp - WITH RAILS + $2,686.00 
CSHR4 - 4 ft ramp - WITH RAILS + $808.00 
CSHR6 - 6 ft ramp - WITH RAILS + $968.00 
CSHR8 - 8 ft ramp - WITH RAILS + $1,133.00 

ADA approved wheelchair or scooter ramp, slip resistant, and made entirely of recycled tires. Ideal for indoor or outdoor use, this ramp provides a safe and smooth ground-to-sill transition. It is especially practical for sliding glass doors because it does not interfere with the door track. 48" wide and 2 1/2" high. 600-lb. weight capacity. (2 1/2" x 24" x 48")

Harmar’s all new Highlander Residential wheelchair lift is a safe, smooth and economical solution to the barriers porches and other elevation changes can create in and around a home. Designed from the ground up to be as cost-efficient as possible, the 53” Highlander wheelchair lift is priced to be competitive with shorter units but built to acommodate most residential applications with ease. As with all Harmar wheelchair lifts, the Highlander is simple to install, easy to operate and virtually maintenance free for use indoors and out. The Highlander wheelchair lift has a weight capacity of 600 lbs.

The CPL060 fascia panel is used to close off under the upper landing if there is not already something there. The area under the upper landing cannot be left open because it will be a pinch/sheer point and that does not meet any codes in any state. The CPL060 fascia panel is 41" wide and is sold by the foot depending on height. ($99/foot) Call a sales representative to add this option to your order.

Harmar Vertical Platform Lifts meet ANSI/ASME A18.1 Performance Safety Standards. While Harmar VPLs meet National standards it is very important to check State and Local code requirements before purchasing and installing to ensure compliance. All local and State compliance is the responsibility of the purchaser.

Manufacturer suggested retail is $5,299 - Check out our price!

Made in the USA

If ordering online, select FREIGHT OPTION PREVIOUSLY CHOSEN because you will have selected freight here before going further into the ordering process.

Freight - Must Select When Ordering Online
Central + $345.00 
Northeast + $420.00 
Northwest + $470.00 
Southeast + $420.00 
West + $420.00 

RPL Accessories - See Table Below for Description
CPL002 + $899.00 
CPL003 + $899.00 
PL016 + $149.00 
PL018 - (2 batteries) + $225.00 
RPL030 - batteries not included + $899.00 
RPL053 + $299.00 

Tower Option - MUST SELECT ONE
Tower on left side 
Tower on right side 

Harmar Access Stairway Lifts transform unfriendly multi-story houses into easily accessible homes. Models available for every budget make staying in your home a safe and simple reality. Harmar Access Stairway Lifts are the perfect solution to reliably and effortlessly traverse your staircase in complete comfort.

MSRP IS $2,999. CHECK OUT OUR PRICE!

SL350 Series Assessment Sheet must be completed to order

SL350 Assessment Sheet

SL350 Stair Lift Specifications

Select Freight Previously Chosen when ordering online, because you will have chosen freight here before going further into the ordering process.

Freight Continental U.S. - must select
Freight + $125.00 

Options
SL315 - Key lock package + $400.00 
SL320 - Flip up arms + $300.00 
SL325 - Extra wide seat - 21 inches + $300.00 
SL330 - Grocery Basket + $250.00 
SL335 - Cargo Rack + $500.00 
SLR16C - custom rail less than 16 ft + $100.00 
SLR20C - custom rail 16 to 20 ft + $300.00 
SLR25C - custom rail 20 to 25 ft + $500.00 
SLRU20 - 20 ft rail upgrade + $200.00 
SLRU25 - 25 ft rail upgrade + $400.00 

Harmar Access Stairway Lifts transform unfriendly multi-story houses into easily accessible homes. Models available for every budget make staying in your home a safe and simple reality. Harmar Access Stairway Lifts are the perfect solution to reliably and effortlessly traverse your staircase in complete comfort. SL350DC is battery powered and continually charged any place on the track. It does have an electrical chord and the unit is battery operated with a constant charge to the batteries. If the power goes out, you will have approximately 10 trips left on the unit before it needs to be recharged. Replacement batteries 7.2 amp/12 volt sealed lead acid are available at $70 each.

MSRP IS $3,199. CHECK OUT OUR PRICE!

SL350 Series Assessment Sheet must be completed to order

SL350 Assessment Sheet

SL350 Stair Lift Specifications

Select Freight Previously Chosen when ordering online, because you will have chosen freight here before going further into the ordering process.

Freight Continental U.S. - must select
Freight + $125.00 

Options
SL315 - Key lock package + $400.00 
SL320 - Flip up arms + $300.00 
SL325 - Extra wide seat - 21 inches + $300.00 
SL330 - Grocery Basket + $250.00 
SL335 - Cargo Rack + $500.00 
SLR16C - custom rail less than 16 ft + $100.00 
SLR20C - custom rail 16 to 20 ft + $300.00 
SLR25C - custom rail 20 to 25 ft + $500.00 
SLRU20 - 20 ft rail upgrade + $200.00 
SLRU25 - 25 ft rail upgrade + $400.00 

ATTENTION SCHOOLS, CHURCHES, STAGE ACCESS, RECREATION CENTERS, LIBRARIES AND RESTAURANTS --- The PORTABLE option is great for applications where up to 52 inches is needed for lifting height. Portables are exempt from the National Elevator Codes because they are not attached to anything. Therefore, they do not require the commercial package in commercial applications. Lift comes standard with right tower.

MSRP shown below. Ask your sales rep about a discount!

Freight Continental U.S. - must select
Base Freight to Depot - no charge 
Power end gate on truck + $100.00 
Residential Delivery Fee + $100.00 
Restricted delivery - ie churches and schools + $75.00